Click on links below for specific instructions:
1) Begin installing worktops by drilling the base cabinets for the screws that will fix the tops to the cabinets. On base cabinets without drawers, drill four holes -- measure 4 inches deep and 4 inches from the side, then use a 1/8" drill bit to drill down through the top of the base cabinet. On base cabinets with drawers on top, drill the back of the cabinets as you would an open or door cabinet. At the cabinet front, measure 1 inch deep and 4 inches from the side, then drill at an angle toward the front of the cabinet. This will ensure access with a power screwdriver up through the worktop.
 |
2) Place worktops on cabinets and legs, and using provided screws (#8 flathead phillips head 1-1/4"), screw up through drilled holes to attach worktops to cabinets.
 |
3) On legs, use angle brackets (90ABK020602) to bracket the worktops to the legs, and bracket worktops to drywall where necessary for added support.
 |
 |
4) Where worktops meet without cabinet support, use flat brackets to join tops together. Drill for grommets when applicable.
Copyright © 2004 Modern Industrial Design, Ltd. All rights reserved. | Privacy Policy
