....::::Neocase...Adapting to the way people work.::::....

1) Use installation drawings to determine where each cabinet will be placed, then use a level to find the highest spot on the floor. Place the first cabinet on the highest spot found and level using a 4mm allen wrench. Levelers are accessed through holes in the cabinet bottom; be sure to level cabinet in all directions. Place and level other cabinets to the same height as the first, ensuring fronts are flush and there are no gaps between them. Use clamps and a rubber mallet to fit cabinets tightly together.

2) Use a 3/8” drill bit to drill through both cabinets at one of the pre-drilled system holes. Fasten cabinets using the provided hex bolts and tighten using 4mm allen wrench. Two connecting bolts are sufficient for fastening two adjacent cabinets.

3) Ensure that cabinets are level and adjust door hinges so that reveals are straight and uniform. Plastic plugs are provided to cover leveler access holes. Install the provided shelf pins and shelves. Note: shelves over 33” wide require provided metal stiffeners at back of shelf.